Stormwater Control

channel stormwater


Land development and construction activities significantly alter drainage patterns and contribute pollutants to urban runoff. During construction, erosion and removal of existing landscaping can create downstream impacts. After construction, impervious surfaces created by buildings, roads, and parking lots prevent storm water from directly percolating into the soil, and create an adverse impact on water quality. In fact, 80 percent of surface water pollution is attributed to urban runoff.

As the amount of impervious surface increases in a watershed, water that previously percolated into the soil and was filtered begins to flow directly to storm drains that lead to our creeks and rivers without being treated. Untreated stormwater can be a source of pollutants, such as automotive fluids, cleaning solvents, toxic or hazardous chemicals, sediment, detergents, pesticides, and oil and grease.

With the growing concerns about urban storm water pollution, Federal and State environmental regulations require new and redevelopment projects to implement controls that treat polluted storm runoff before it reaches any receiving waters.

So what can you do to help out?  Below are a few links and information that get you started.

The City of Kettering is working together with Montgomery County Soil and Water District (MCSWD) to hold rain barrel workshops.  The next workshop will be held Saturday April 23, 2016 at the Habitat Environmental Center 3036 Bellflower Street.  For more information about MCSWD, click on the link below.
Montgomery County Soil and Water District

Also check out upcoming events sponsored by our KetterGreen Team.  What is KetterGreen, Click Here to find out!

Click here to find out some things you can do to help with stormwater management.

City of Kettering Storm Water Maintenance Policy

The City’s NPDES Permit

The City’s National Pollutant Discharge Elimination System (NPDES) permit requires the City and permit applicants to address storm water pollution issues in development of private and public projects. The requirements include implementation of Best Management Practices (BMPs) during construction and the use of Integrated Management Practices (IMPs) for permanent, post-construction controls to reduce pollutants discharged from the project site.

Depending on the site and other conditions (e.g. clay soils or other poor percolation conditions), storm water management goals can be achieved by incorporating one or more basic elements, such as: infiltration, retention/ detention, and bio-filters.

Streets, parking lots, driveways, and landscaping areas can be designed to cause less impact in stormwater quality while providing aesthetic benefits. The following is a short list of endless possibilities:

• Narrower streets
• Hybrid parking lots that combine impervious aisles with permeable parking stalls,
• Parking groves, concave medians,
• Driveways using permeable materials such as unit pavers or crushed aggregate,
• Infiltration trench or basin,
• Wet ponds,
• Constructed wetlands,
• Extended detention basin,
• Vegetated swales,
• Vegetated buffer strips, and
• Bio-retention landscaping.

Below is a list of additional resources
Miami Conservancy District
Ohio Environmental Protection Agency
US Environmental Protection Agency

The city’s Stormwater Runoff Code must be adhered to for all development and redevelopment projects within the city.

Stormwater Runoff Code - Chapter 1701 Flood Damage Prevention Code - Chapter 1104

For questions, call 937-296-2436.

Preview site